Wall Foam for In-Ground Pools
PROTECTS LINER FROM SHARP EDGES AND CORROSIVE MATERIAL!
- Closed-cell 1/8" foam padding provides a smooth wall backing, preventing rust, corrosion, or other wall degradation from puncturing or wearing down your liner.
SPRAY ADHESIVE
- Provides quick, easy and permanent application of Wall Foam!
- Can weight 17 oz.
- Can contains 24 fl. oz. (material expands)
- Four cans required for every 125 ft. of Wall Foam.
- Qty.
- Item No.
- Item Name
- Only!
PROTECTS LINER FROM SHARP EDGES AND CORROSIVE MATERIAL!
- Closed-cell 1/8" foam padding provides a smooth wall backing, preventing rust, corrosion, or other wall degradation from puncturing or wearing down your liner.
SPRAY ADHESIVE
- Provides quick, easy and permanent application of Wall Foam!
- Can weight 17 oz.
- Can contains 24 fl. oz. (material expands)
- Four cans required for every 125 ft. of Wall Foam.
-
Customer Reviews
Rated 5 out of
5
by
Lyle from
Great product
This foam was light and easy to put up on the walls of the pool.
Date published: 2015-07-16
Rated 5 out of
5
by
Debit from
EXCELLENT customer service
The wall foam wasn't the only thing we ordered. Due to the fact that we obviously hired someone unprofessional to install a new liner and they left with our money, Leaving us high and dry (literally). We had to start from the beginning and do it all ourselves. Measuring and ordering the liner. Ordering all new jets, gaskets, light, etc... AND we had no idea what we were doing. Larry Weinberg was so incredibly helpful. He basically held my hand through the whole process. When I ordered a part, he would make sure I had everything I'd need for the installation (gaskets, screws, etc...). My next liner will be ordered from SPP and I'll go to Larry with any questions I have! Thank you again!
Date published: 2015-07-10
Rated 5 out of
5
by
Warrior from
Foam
Very easy to use and a nice feel on the steps and walls
Date published: 2015-06-18
Rated 2 out of
5
by
Clark from
Glue dried too quickly
We sprayed the pool walls (wood) and then went to put on the foam and found that the glue had dried and that there was no tackiness to it. No instructions on the can informed us of this, and this is not typical of spray glues I have used int eh past (for other things). In the end it was completely useless.
Date published: 2015-06-15
Rated 5 out of
5
by
SouthernBelle75 from
Best pool wall adhesive
This adhesive was used for the installation of the pool wall foam on our above ground pool.. It was a God send in regards to the pool wall foam adhesion.. Super quick drying and the tackiness was spot on for the perfect adhesion of a wall foam. We used three cans on our 24' Round above ground pool.. Highly recommend this product! If you are even thinking about installing a wall foam to your above ground pool this product is a must have! The spray nozzle has three different settings for the spray flow, I chose to use the heavy application and it worked like a charm!
Date published: 2015-05-19
Rated 5 out of
5
by
Tannersbiz from
Worth every penny!!
Just redid my pool and I'm happy to add this to the list of improvements! I was a little unsure about the 1/8 thickness but after feeling the foams density I'm glad to say it provides plenty of padding and protection for the liner. I am very happy with and would highly recommend this product, It's worth every penny!
Date published: 2015-04-10
Rated 5 out of
5
by
tom from
Gladon Spray
Order came quickly , Product worked fine
Date published: 2014-12-12
Rated 5 out of
5
by
sweets from
pool foam
product is like it should be good quality quick service!! thanks
Date published: 2014-10-24
