1-800-983-7665

  • 0Cart
    • Showing 0 of 0 item View All

      Estimated SUBTOTAL* :  $0.00

      *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    • Checkout
    Source / Promo Code:SPPPROMO(Edit)
    FREE SHIPPING Handling May Apply

    FREE NEXT DAY DELIVERY! See What's Available In Your Area

    18x33 ft Oval 54" Wall Overlap Pool Liners
      • bvseo_sdk, java_sdk, bvseo-3.1.0
      • CLOUD, getAggregateRating, 43ms
      • REVIEWS, PRODUCT
      • bvseo-msg: The resource to the URL or file is currently unavailable.;
    This Oval Pool Liner Creates an Attractive Pool Ambiance with Lasting Durability
    • Overlap pool liners designed to fit any 18x33 ft. oval above-ground pool with 54 in. walls
    • Compatible with flat-bottomed pools only
    • UV-resistant virgin vinyl and double-sealed seams withstand years of rotating exposure to sunlight and freezing temperatures
    • Available in several attractive patterns
    • 20 gauge liners come with 15-year warranty
    • 25 gauge liners come with 20-year warranty
    more information
      • Qty.
      • Item No.
      • Item Name
      • Only!
      • L1550C
      • Boulder Swirl
        20-Gauge
      • Boulder Swirl
        20-Gauge
      • L1550C
      • Was $439.99
        $395.99
      • Was $439.99
        $395.99
      • L1595C
      • Boulder Swirl
        25-Gauge
      • Boulder Swirl
        25-Gauge
      • L1595C
      • Was $619.99
        $557.99
      • Was $619.99
        $557.99
      • L1550E
      • Rolling Wave
        20 Gauge
      • Rolling Wave
        20 Gauge
      • L1550E
      • Out Of Stock
      • Out Of Stock
      • L1550F
      • Caribbean
        20 Gauge
      • Caribbean
        20 Gauge
      • L1550F
      • Out Of Stock
      • Out Of Stock
      • L1595F
      • Caribbean
        25-Gauge
      • Caribbean
        25-Gauge
      • L1595F
      • Out Of Stock
      • Out Of Stock
      This Oval Pool Liner Creates an Attractive Pool Ambiance with Lasting Durability
      • Overlap pool liners designed to fit any 18x33 ft. oval above-ground pool with 54 in. walls
      • Compatible with flat-bottomed pools only
      • UV-resistant virgin vinyl and double-sealed seams withstand years of rotating exposure to sunlight and freezing temperatures
      • Available in several attractive patterns
      • 20 gauge liners come with 15-year warranty
      • 25 gauge liners come with 20-year warranty
      more information
      • More Information
      • Customer Reviews
      • MORE INFO

      Available in two gauges of thickness, these oval pool liners are attractive, durable and long-lasting. Designed to fit any 18x33 ft. flat-bottomed oval above ground pool, choose one of several patterns to best fit your style and outdoor decor and between 20 and 25 gauge virgin vinyl depending on your pool’s needs and your budget. These overlap pool liners are made with built-in UV-resistance to prevent deterioration over years of exposure to sunlight, and are made with double-welded seams to withstand freezing temperatures during winter months. The liners are made for oval pools with flat bottoms and 54-inch side walls.

      • bvseo_sdk, java_sdk, bvseo-3.1.0
      • CLOUD, getReviews, 0ms
      • REVIEWS, PRODUCT
      • bvseo-msg: The resource to the URL or file is currently unavailable.;
      Installation Instructions
      RECOMMENDED ITEMS NEEDED FOR INSTALLATION
      • 2” gray duct tape with non-asphalted adhesive
      • screwdriver
      • garden hose
      • sharp nail or ice pick
      • industrial vacuum or household vacuum (filter bag removed)
      • tamping tool
      • masking tape
      • utility knife







        WARNING: Liner should be stored at room temperature for at least 72 hours prior to installation.

      PREPARATION OF POOL BOTTOM

      1. Spread a 2” layer of brick sand over the entire pool foundation area inside the base rails. Use a rake to make the brick sand flat and smooth. Tamp sand to help reduce footprints. In place of brick sand, you can use “Soft Step” Floor Padding. Cut the sheets to fit and join them with duct tape along the whole length of each seam.

      2. With the brick sand, make a curved cove about 4” high and 4” wide all around the bottom of the pool wall on the inside. Pack firmly into shape. Pool Cove can also be used.


      LINER INSTALLATION

      1. Place the closed liner carton in the center of the pool.

      2. Open the carton. Do NOT use anything sharp to open the carton.

      3. Unfold the liner and spread it out in the sun to warm up.

      4. Inspect all seams and surfaces for holes.

      5. Spread out liner. The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. If seams appear to have flaps, check to see if correct side is up.

      6. Smooth out all wrinkles in the bottom.

      7. If you have a beaded liner, fasten the liner in place by lifting the sides of the liner and inserting the beaded edge into the liner retainer on the top edge. If you do not have a beaded liner, lift the sides of the liner and drape them over the top of the pool wall. Fasten liner to the top of the wall with plastic coping. Let the liner hang slack for now. Do NOT pull liner tight.

      8. Start filling the pool with water. As the pool fills, work out the wrinkles and smooth the liner to the wall. Remove the plastic coping around the top edge of the wall one piece at a time and adjust the liner. Keep smoothing out the wrinkles.

      9. Do not install faceplates, inlets, light fixtures, etc. until water reaches 3” below each opening. Premature installation might result in the liner tearing away from the opening due to stretching as the water level increases.

      10. Proceed filling pool until water reaches desired level.


      OPTIONAL STEP TO ELIMINATE WRINKLES

      1. To remove air from behind the liner, which prevents wrinkles, insert a vacuum cleaner hose through the skimmer hole in the pool wall behind the liner. To minimize vacuum loss, seal the opening around the hose and the water inlet using cardboard and masking tape.

      2. Turn vacuum cleaner on. While vacuum is running, you should be adjusting the liner with short tugs to eliminate wrinkles. If you have trouble shifting the liner into position, shut vacuum off for a few minutes. You should then be able to adjust the troubled area before continuing with the vacuum.

      3. Start filling the pool with water. The vacuum cleaner should continue to run until water level nears the top. Make sure to keep vacuum cleaner hose above the water level at all times.
      People Also Purchased
      More