Steam Bath Generators - Sauna
Benefits of Steambathing:
- Helps relive tired muscles as heat penetrates your body
- Most heat opens the pores of your skin, leaving it softer and more supple
- Natural perspiration during steambathing may remove impurities from your body
- Improved breathing and a sense of cleanliness contribute to a feeling of wellness
- Add aromatherapy oils to enhance your steambathing experience
- After steambathing, a cold shower will leave you feeling refreshed, revitalized and rejunvenated
- A hot shower after steambathing will encourage a good night sleep
- Feelings of relaxation and rejuvenation
Safety
- As commonly accepted in the medical field for sanitary objectives, Steamcore uses #304 stainless steel boiler tanks to avoid oxidation or corrosion.
- Steamcore has a built-in "High Limit" which prevents the unit from overheating
- Steamcore units use three levels of water sensors (stainless steel probes) to prevent the unit from activating the elements
- "Insulmax" by Tritex insulation is used in the steam generator for fireproofing safety
- The "Zero-Voltage Air Switch" with LED indicator light and "Commander" control can be operated within the steam room
- All Saunacore products are approved to CSA, UL and CE standards. Best of all, you can be ensured that you'll receive a product that you can trust and rely on thanks to our high quality and performance
Durability
- Industrial incoloy 800 series elements used (Silver models)
- Elelemnts are more corrosive-resistant than copper and brass
- Low-density industrial incoloy 800 series elements are used (Gold models)
- "Insulmax" by Tritex Insulation is used to insulate the boiler tank, making the machine more efficient and, in turn, keeping the exterior body of the unit cool to the touch
- An "Auto Flush" and "Auto Rinse" are located at the lower side of the tanks in order to clean it of build up of limestone and calcium (to ensure this, every function has three flush and three rinse cycles - Silver & Gold models)
- Flexible metal tubing is used to protect the wires of the steam tank
- Tank divider and boiler tank is made with #304 stainless steel (Gold model)
- All element connections are used with stainless steel bars
- Boiler is tick-welded to prevent any kind of leakages
- The exterior body is built with louvres for air circulation
- Filling/Drain solenoid valve has been tested for 10 million functions capability
- Offers multiple choices of water connection: 3/4-inch, 1/2-inch or 1/4-inch.
Installation Components
- Compression fittings and unions
- Built-in magnetic contractor
- All steam bath generators ahve steam heads with fragrance holders
- Solenoid with a strainer
- Filtration or softeners are not required for installation
- Steamcore is functional and durable even in hard water
- Steamer runs super quiet
- 30 minutes to 1 hour built-in back-up timers (easy to convert)
Easy On-Site Service
- Steamcore units make it easy to test any components
- Our silver solder elements are bolted into the tanks, making them easy to service.
- If needed, the water level control needs only to be cleaned, it never needs to be replaced
- All components can be serviced or tested on-site
- Limited lifetime warranty on boiler tank and water level probes
Controls
Mechanical
- 30 minute timer
- Temperature cut-off sensor
- Exterior Use
Commander
- Electornic 'push' button thermastat and timer control
- Fan operation capability, Light operation capbility
- 5-20 ft. capillary
Air Switch Control
- LED indicator light
- Fixed 30-minute or 1-hour timer
- Temperature cut-off sensor
|
